Chemtronics Electro-Wash NXO ES1607 - Manual (Page 2)

Material Compatibility
Buna-N Not Recommended
Graphite Good
HDPE Good
Kynar

Poor
LDPE Good
Lexan

Not Recommended
Neoprene Poor
Noryl

Poor
Cross-Linked PE Good
Polyacrylate Not Recommended
Polystyrene Not Recommended
PVC Poor
Silicone Rubber Not Recommended
Teflon

Good
Viton

Poor
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to clean.
Wash parts from top to bottom, allowing the
liquid to flush away dirt and dissolved
grease. For optimum performance and pin
point control, Electro-Wash® NXO Cleaner
/Degreaser should be used with the attached
extension tube.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
Aerosol Only
CFC 0.0% VOC 42.0%
HCFC 0.0% HFC 25.0%
CL Solv. 0.0% ODP 0.00
AVAILABILITY
ES1607 12 oz. Aerosol
ES107 1 Gallon Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. F (08/14)
DISTRIBUTED BY: