Chemtronics Electro-Wash PR ES1603 - Manual (Page 2)

Material Compatibility
ABS Non-Compatible
Buna-N Fair
EPDM Fair
Graphite Excellent
HDPE Excellent
LDPE Good
Lexan

Fair
Neoprene Fair
Noryl

Poor
Nylon

66 Excellent
Cross-Linked PE Excellent
Polypropylene Excellent
Polystyrene Non-Compatible
PVC Excellent
Silicone Rubber Poor
Teflon

Excellent
Viton

Fair
COMPETITIVE ASSESSMENT
Milligrams of Lithium Greased Removed Per 7 Second Spray
1,000 _
_
800 _ 823
_
600 _ 67%
_ Better 493
400 _ Cleaning
_ 299
200 _
0
Chemtronics Competitor 1 Competitor 2
Electro-Wash PR
USAGE INSTRUCTIONS
For commercial use only.
Read MSDS carefully prior to use.
Spray 4 to 6 inches from surface to clean. Wash
parts from top to bottom, allowing the liquid to flush
away dirt and dissolved grease. For precise
application use attached extension tube. Flammable -
Do Not near sources or ignition or energized
equipment.
AVAILABILITY
ES1603 10 oz. Aerosol
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 75.0%
HCFC 0.0% HFC 16.0%
CL Solv. 0.0% ODP 0.00
CFC, HCFC, CL. SOLV., VOC, and HFC numbers
shown are the content by weight. Ozone depletion
potential (ODP) is determined in accordance with the
Montreal Protocol and U.S. Clean Air Act of 1990. The
ODP of this product is 0.10. It is the sum of the ODP of
the substances that may contribute to the depletion of
stratospheric ozone, based upon the weight of each
substance in the product’s formulation.
NOTE: This information is believed to be accurate. It is
intended for professional end users having the skills to
evaluate and use the data properly. CHEMTRONICS
does not guarantee the accuracy of the data and assumes
no liability in connection with damages incurred while
using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. E (08/14)
DISTRIBUTED BY: