Chemtronics Electro-Wash VZ ES6155 User Manual
Page 2

Material
Compatibility
ABS
Poor
Buna-N
Good
EPDM
Good
Graphite
Good
HDPE
Good
Kynar
Good
LDPE
Good
Lexan
Poor
Neoprene
Good
Noryl
Good
Nylon
66
Good
Cross-Linked PE
Good
Polypropylene
Good
Polystyrene
Poor
PVC
Good
Silicone Rubber
Good
Teflon
Good
Viton
Good
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to clean.
Wash parts from top to bottom, allowing the
liquid to flush away flux residues, dirt and
dissolved oil. For precision application use
attached extension tube.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-
TECH-401.
AVAILABILITY
ES6100
12 oz. Aerosol
ES6119
19 oz. Aerosol
ES6101
1 Gallon
ES6155
53 Gallon
ENVIRONMENTAL IMPACT DATA
HCFC-141b
HCFC-225
None
None
HFC
nPB
Yes
None
Hydrochlorofluorocarbons (HCFCs) are regulated under the Montreal Protocol
as Class II ozone depleting substances. HCFC-141b is no longer produced in
the US under this legislation. HCFC-225 is planned for production phase-out
in 2015. Hydrofluorocarbons (HFCs) are not currently regulated.
EPA has listed n-propyl bromide (nPB) as an acceptable alternative to ozone
depleting substances in metal, precision, and electronics cleaning under
Section 612 of the Clean Air Act.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. E (08/13)
Electro-Wash
and Chemtronics are registered
trademarks of Chemtronics. All rights reserved.
Verizane
, is a trademark of Chemtronics. All rights
reserved.
Vertrel® and DuPont
are trademarks or registered
trademarks of E. I. duPont de Nemours and Company.
DISTRIBUTED BY: