Chemtronics Flux-Off CZ ES7200 - Manual (Page 2)

ABS Excellent
Buna-N Excellent
EPDM Excellent
Graphite Excellent
HDPE Excellent
Kynar

Excellent
LDPE Excellent
Lexan

Good
Neoprene Excellent
Noryl Excellent
Nylon
 66
Excellent
Cross-Linked PE Excellent
Polypropylene Excellent
Polystyrene Good
PVC Excellent
Silicone Rubber Excellent
Teflon

Excellent
Viton

Excellent
COMPETITIVE ASSESSMENT
Milligrams of Rosin Flux Removed
Per Gram of Solvent
5
_
_
4 _ 3.8
_
3 _ 2.6
_
2 _
_ 1.1
1 _
0
Flux-Off CZ CFC-113 HCFC-225
Flux Remover (TF)
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
AVAILABILITY
ES7200
12 oz. Aerosol
ES7208B 5 oz. Brush Clean System
ES7201 1 Gallon Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to clean.
Wash parts from top to bottom, allowing the
liquid to flush away flux residues, dirt and
dissolved oil. For precise application use
attached extension tube.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. G (08/13)
Flux-Off
 and Chemtronics are registered trademarks of
Chemtronics. All rights reserved.
Cirozane
, is a trademark of Chemtronics. All rights
reserved.
DISTRIBUTED BY: