Chemtronics Flux-Off Lead Free ES897B - Manual (Page 2)

Material Compatibility
ABS Non-Compatible
Buna-N Non-Compatible
EPDM Excellent
Graphite Excellent
HDPE Excellent
LDPE Good
Lexan

Non-Compatible
Neoprene Fair
Noryl

Non-Compatible
Nylon
 66
Excellent
Cross-Linked PE Excellent
Polypropylene Excellent
Polystyrene Non-Compatible
PVC Non-Compatible
Silicone Rubber Non-Compatible
Teflon

Excellent
Viton

Non-Compatible
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6” from surface to clean. Wash parts
from top to bottom, allowing the liquid to
flush away flux residue.
Flux-Off

Lead-Free Flux Remover can be
used to remove all types of fluxes in batch
cleaning applications, including ultrasonic
systems specifically rated for use with
flammable solvents.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-
TECH-401.
AVAILABILITY
ES1697 12 oz. Aerosol
ES897B 8 oz. BrushClean
 System
ES197 1 Gal. (3.7 L) Liquid
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 51%
HCFC-141b
HCFC-225 0.0%
0.0%
HFC
nPB
0.0%
0.0%
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (08/13)
Chemtronics
 and Flux-Off are registered trademarks of
Chemtronics. All rights reserved. BrushClean
 is a trademark
of Chemtronics. All rights reserved.
DISTRIBUTED BY: