Chemtronics Freeze-It ES1550 - Manual (Page 2)

Material Compatibility
Buna-N Fair
Graphite Good
HDPE Good
LDPE Good
Lexan

Poor
Neoprene Good
Cross-Linked PE Good
Polyacrylate Poor
Polystyrene Good
PVC Good
Silicone Rubber Fair
Teflon

Good
Viton

Poor
Competitive Assessment of Freez-It

Chemtronics
Freez-It
33% Less
Static
Competitor’s
Freeze Spray
0 20 40 60 80 100 120
% Static Generation
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
No special surface preparation is required prior to
using Freez-It

. Direct spray onto the area to
instantly cool components, circuit boards or
adhesives. For optimum performance and pin point
control, use
Freez-It

with the attached extension tube.
AVAILABILITY
ES1050E 10 oz. Aerosol
ES1550E 15 oz. Aerosol
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions. The
toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 0.0%
HCFC 0.0% HFC 100.0%
CL Solv. 0.0% ODP 0.0
CFC, HCFC, CL. SOLV., VOC, and HFC numbers
shown are the content by weight. Ozone depletion
potential (ODP) is determined in accordance with the
Montreal Protocol and U.S. Clean Air Act of 1990.
The ODP of this product is 0.0. It is the sum of the
ODP of the substances that may contribute to the
depletion of stratospheric ozone, based upon the
weight of each substance in the product’s formulation.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. F (08/13)
DISTRIBUTED BY: