Cobra Electronics 9 BAND ESD 9270 - Manual (Page 4)

English 2
Installation
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Nothing Comes Close to a Cobra ® 3
Installation
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Installation
•
Where to Mount Your Unit
You will get optimum performance from your detector if you Mount it at a point
approximately in the center of the vehicle, as low as possible on the front windshield
without obstructing the unit’s view of the road either to the front or rear. You can
also mount it directly on the dashboard.
The unit’s lens must not be blocked and the LaserEye should have a clear view
out the back window to allow 360° detection.
Radar and laser signals pass through glass but not through other materials and
objects. Objects that can block or weaken incoming signals include:
n
Windshield wiper blades
n
Mirrored sun screens
n
Dark tinting at the top of the windshield
n
Heated windshields currently available on some vehicles
(Instaclear for Ford, Electriclear for GM). Consult your dealer
to see if you have this option.
The LaserEye Should Have a Clear View
Attach the rubber cups
to the bracket.
Make sure the rubber cups and your windshield are clean.
. Push the bracket firmly onto
the windshield.
Attach the detector to
the bracket.
To adjust the angle if neces-
sary, gently push or pull on
the bracket to bend it. DO NOT
use the detector to bend the
bracket.
Plug the power cord
into the detector.
Plug the cigarette lighter
adapter on the power
cord into your vehicle’s ciga-
rette lighter.
You can temporarily remove the detector whenever
you wish by depressing the bracket release button
and sliding it off the bracket.
Windshield Mounting