Pro-Link Diamond Coat - Ultra Hard Finish D1077 - Manual (Page 3)

None normally required if ventillation is adequate.
Respiratory Protection:
Rubber gloves, if prolonged contact
Skin Protection:
Safety Glasses or Goggles
Eye Protection:
Chemical apron when handling large volumes of material.
Other:
Local exhaust to maintain general good ventillation.
Ventilation Requirements:
Liquid Physical Form:
Opaque Color:
Glycol Ether Odor:
Approximately 212°F Boiling Point:
About the same as water. Evaporation Rate:
8.5 ± 0.5 pH:
1.029 Specific Gravity:
Emulsifiable Solubility:
NE Freezing Point:
78% % Volatile:
This product is stable at ambient temperature and pressure.
Stability:
NA
Hazardous Decomposition Products:
None
Hazardous Polymerization:
None
Incompatibility:
Page: 3 of 4 11/21/06
Diamond Coat
Section 8 - Exposure Controls Personal Protection
Section 9 - Physical / Chemical Properties
Section 10 - Stability and Reactivity
NE Vapor Pressure: 5.6% V.O.C.