Canon 5600F - Manual (Page 14)

Safety Precautions
12
Safety Precautions
Please read and take note of the following precautions before using the scanner and accessories.
WARNING
Indicates a warning concerning operations that may lead to death or injury to persons if not
performed correctly. In order to use the scanner safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to persons or damage to
property if not performed correctly. In order to use the scanner safely, always pay attention to these cau-
tions.
About Locations
WARNING
• Do not place the scanner near flammable liquids such as alcohol or thinners. If the internal electrical
parts come in contact with flammable liquids, fire or electrical shock may result.
CAUTION
• Do not place the scanner in areas with high humidity, areas subject to direct sunlight, areas with high
temperatures and areas near flame sources. Fire or electrical shock may result.
• Do not place the scanner on shaky stands, unstable surfaces or surfaces subject to frequent
vibrations. If the scanner falls, it may cause injuries.
• Do not place heavy objects on the scanner. Objects may fall and cause injuries.
• Do not push the scanner into a narrow cabinet or put a tablecloth on it or place on a thick rug. If the
scanner has heat, it may cause fire or damage.
About the Power Supply
WARNING
• Do not plug the power cord into outlets with voltages other than the specified voltages. Incorrect
voltages may result in fire or electrical shock.
• Do not place heavy objects on, pull or excessively bend, twist or tie the power cord. Damaged wires
may cause fire or electrical shock.
• Unplug the power cord from the outlet periodically and use a dry cloth to clean the area around the
base of the outlet to ensure that all dust is removed. Also do not plug in/unplug the power cord with
wet hands. Fire or electrical shock may result.
• Do not connect excessive numbers of plugs into one electrical outlet. Fire or electrical shock may
result.
• Always plug the power cord in all the way. If it is not plugged in completely, fire or electrical shock
may result.
• Do not use cables other than the one supplied. Fire or electrical shock may result.
CAUTION
• When unplugging the power cord, always pull on the main body. Pulling the cord may damage the
wires and lead to fire or electrical shock.
• Do not place objects around the power cord in case it needs to be unplugged during emergencies.
• If you hear thunder, do not touch the scanner, power cord and cables. Otherwise the lightning stoke
may cause electrical shock.