Pro-Link Lithofin MN Power-Clean 120069 - Manual (Page 2)

Material Safety Data Sheet
Printed: 08.11.2004
Revised: 03.11.2004
Lithofin MN Power-Clean
2
—————————————————————————————————————————————
4 First aid measures
General information
Immediately remove any clothing soiled by the product.
After inhalation
In case of complaints which may be caused by vapours supply fresh air and call for a doctor.
After skin contact
Take-off and remove wetted clothing, shoes and stocking immediately.
Rinse affected parts of the body with plenty of water.
Immediate medical treatment necessary. Failure to treat burns can prevent wounds from healing.
After eye contact
First check the victim for contact lenses and remove if present.
Rinse the eyes with open eyelids for 10 - 15 minutes with water. Then consult an eye specialist
immediately.
After swallowing
Do not induce vomiting
Drink plenty of water, but never give anything to an unconscious person.
Seek medical treatment.
Information for doctor
Treatment
Symptomatic treatment
In cases of irritation to the lungs, initial treatment with Dexametason metered aerosol.
—————————————————————————————————————————————
5 Fire fighting measures
Suitable extinguishing agents
The product is not combustible and does not support combustion.
Use fire fighting measures that suit the environment.
Special hazards caused by the material, its products of combustion or resulting gases:
No hazards known
Protective equipment:
Wear self-contained respiratory protective device.
Wear fully protective suit.
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
Collect contaminated fire fighting water separately. It must not enter the sewage system.
—————————————————————————————————————————————
6 Accidental release measures
Person-related safety precautions:
Ensure adequate ventilation
Wear protective clothing.
Keep unprotected persons away.
Measures for environmental protection:
Do not allow product to reach sewage system or any water course.
Do not allow to penetrate the ground/soil.
Measures for cleaning/collecting:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralizing agent.
Send for recovery or disposal in suitable receptacles.
Dispose contaminated material as waste according to item 13.
—————————————————————————————————————————————
7 Handling and storage
Handling
Information for safe handling:
Use only in well ventilated areas.