Compaq AA-Q88CE-TE User Manual
Page 221
SHOW LINK
/FULL
Equivalent to specifying
/FACILITY/STATE
.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
. If
node-list
is omitted then the command is executed only on the node where the
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
file-spec
. If
/OUTPUT
or
file-spec
is omitted then the standard or default output is used.
/STATE
/NOSTATE (D)
Specifies that a detailed status of the specified link(s) is displayed.
Related Commands
•
SET LINK
•
CREATE FACILITY
•
SHOW FACILITY/LINK
Example
RTR> SHOW LINK/FULL IRON
Links:
To Node:
iron
Address:
iron.zuo.dec.com
Status:-
Outgoing message sequence nr:
22
Incoming message sequence nr:
22
Current receive buffer size:
2048
Current transmit buffer size:
2048
Current number of link users:
1
Write buffer timed out:
no
Write buffer full, may be sent:
no
Write buffer allocated:
yes
I/O error detected in write:
no
I/O error detected in read:
no
Pipe temporarily blocked:
no
Connection broken:
no
Write issued, not completed:
no
Read is pending:
yes
Node initiated the connection:
yes
Connection established:
yes
Connection in progress:
no
Node is configured:
yes
Link is in disabled state:
no
Link may be suspect:
no
Facilities:-
In facility:
steve2
Frontend:
no
Router:
yes
Backend:
no
Router -> Frontend:
no
Frontend -> Router:
yes
Backend -> Router:
no
Router ->Backend:
no
Router quorate:
no
Backend quorate:
no
Router current:
yes
Backend coordinator:no
This example shows
•
The name and network address of the partner node.
•
Link status.
•
Name of facility using this link and how the link is used in the facility.
RTR Command Line Interface 6–145