Axesstel TX240G - Manual (Page 19)

19
SETTING AUTOSEND TIME
Similar to a landline phone, the terminal automatically makes the call shortly after the user
finishes entering the phone number. To change the setting:
1. Pick up the handset.
2. Press
□
*
□
*
□
2
□
2 Then press
□
3 ,
□
9 or
□
0 and press
□
# .
For example, to set the auto-send time to 5 seconds, press □ * □ * □ 2 □ 2 □ 5 □ # .
NOTE 1: 0 value disables auto-send. If disabled, the user must press
□
# to make a call.
□
#
functions as a SEND key on the mobile phone. If auto-send time is set to 0, then the
□ # as SEND feature is automatically enabled.
NOTE 2: The default auto send time is 3 seconds.
USING
□
#
AS SEND KEY
Similar to mobile phones, pressing the
□
# key after entering the phone number can act as SEND
key.
This feature can be enabled or disabled. To change the setting:
1. Pick up the handset.
2. Press
□
*
□
*
□
2
□
3
□
# to enable the feature.
3. Press □ * □ * □ 2 □ 3 □ * to disable the feature.
Note: The default setting is OFF. If the Auto-Send Time is set as 0, then “ □ # as SEND key”
feature is automatically enabled.
SETTING DTMF LENGTH
Some ARS (Automatic Response Service) require short or long DTMF tones depending on the
system. To change the setting:
1. Pick up the handset.
2. Press
□ * □ * □ 2 □ 4 □ # to select Short DTMF tone.
3. Press
□
*
□
*
□
2
□
4
□
* to select Long DTMF tone.