CDA 6V6 - Manual (Page 35)

35
3. Replace the Inner Pane:
– Check that the four rubber pads are in place (D in fig. 28).
– Check that you are holding the pane the correct way. You should
be able to read the wording on it as it faces you.
– Insert the pane in the left E and right F slide guides (fig. 29), and
gently slide it to the retainers H (Fig. 30).
– Reassemble the seal G in the correct way (fig. 31) by hooking
the no. 3 fixing hooks in the proper holes (fig. 32).
4. Unlock the oven door by opening it completely and closing the
lever A on the left and right hinges (fig. 33).
D
G
E
F
H
A
It is normal the opened gap between
the top edge of the inner glass and the
sealed gasket. This allows the cooling air
circulation.
The oven door
has a sealed
gasket in the
top part.
Fig. 28
Fig. 29
Fig. 30
Fig. 32
Fig. 31
Fig. 33
H
D
E
F
A
G