Rane VP 12 User Guide - Manual (Page 8)

Screw Terminal Patch Strip
This strip is configured from the factory with all functions operational in the same left-to-right order as
the front panel. Factory jumper locations are indicated by the arrows. This strip allows reconfiguring the
order of processing functions and/or wiring around unwanted functions. The
SIDE CHAIN PATCH allows the
insertion of external processing.
Features and Benefits:
Feature: Line/Both/Mic Switch
Benefit: Allows summing of both mic and line
inputs. No other voice processor has this feature.
Feature: High and Low Cut Filters
Benefit: Allows both high and low ends to be rolled
off. Often with voice signal there is little or no audio
in these areas, and this affords greater signal-to-
noise ratio.
Feature: Adaptive Ratio Sliding Band
De-esser Circuit.
Benefit: This totally new circuit design provides
more accurate de-essing with fewer artifacts and
more precise control than frequency dependent
compression.
Feature: Frequency Multiplier on
Parametric EQ.
Benefit: Allows each parametric band to cover 10
Hz to 20 kHz while maintaining precise control.
Feature: Parametric bands wired in
series.
Benefit: Doubling up on a frequency in both bands
allows twice the boost and cut.
Feature: Main and Aux Outputs
Benefit: Allows signal to be sent to the stereo input
of the next device or to two different locations with
independent level control.
Feature: Main Out Level (Mic-Line)
Switch:
Benefit: Allows feeding a mic level signal to the mic
input of a console.
Feature: Screw Terminal Patch Strip
Benefit: Allows processing functions to be re-
arranged or bypassed.
520-494 APR96
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 TEL (206)355-6000 FAX (206)347-7757 WEB http://www.rane.com