OFNA Racing 9.5 MBX RTR - Manual (Page 11)

40067
M3x12
TP Screw
40067
M4x15
TP Screw
35314
4mm
Nylon Nut
ASSEMBLY OF THE FRONT SHOCK TOWER
OPT: 49003
CNC 7075 Alum. Shock Tower
49037
Front
Shock Tower, Orange
ASSEMBLY OF THE FRONT PIVOT
BALL KNUCKLE ARM
36901
Ball Type
Knuckle Arms
( Right and Left Side)
* Note the "R" mark
is for righthand side.
* Adjust alum. nut to
keep steering ball
smooth.
Assembly of the right and left hand side
are the same.
Assembly of the right and left hand side
are the same.
* Use 5mm
hex wrench.
36904
14mm
Alum. Nut
36905
Steering Ball
Washer
36903
14mm
Steering Ball
36052
CVD
Universal Joint
36053
8x16mm
Ball Bearing
36053
8x16mm
Ball Bearing
ASSEMBLY OF THE FRONT KNUCKLE ARM
INTO FRONT ARMS
4X10mm
set screw
36870
4x4mm
Set Screw
* A 4x10mm set screw is used
to adjust the ride-height.
* Use a 2.5mm
hex wrench.
40245
Orange
Wheel Hub
( Alum.)
36055
2.5x17mm
Pin
3mm
3.5mm
40202
Front Lower
MBX Arm
40094
Front Upper
MBX Arm
ASSEMBLY OF THE FRONT SUSPENSION ARMS
40023
Lower Arm Shaft (4mm)
90021
3mm
E-Ring
90021
3mm
E-Ring
90020
2.5mm
E-Ring
90020
2.5mm
E-Ring
36170
3mm
Arm Shaft
* Insert the drive shaft into the
cap joint before assembly.
Assembly of the right and left hand side
are the same.