OFNA Racing 9.5 Pro RTR - Manual (Page 29)

Assembly of the right and left hand side
are the same. ASSEMBLY OF THE WHEELS ONTO
FRONT KNUCKLE ARM AND REAR HUB
25mm
25mm
0
5 10 15 20 25 5 10 15 20 25
ASSEMBLY OF THE WING
* Drill two 7mm holes
for mounting.
3x12mm
Screw
J-23
Countersunk
Plastic Washer
*Upper Deck Of
The Wing.
J-52 Wing
* Check the hole spacing on the underside.
OPT:JS-27
Alum. Washer for wing
3 x 25mm
Cap Screw
3mm
Nylon Nut
Plastic Bushing
36610
Shock Spacer
36610
Shock Spacer
36610
Shock Space.....2
36610
Shock Spacer.....2
3x25mm
Cap Screw
3 x 25mm
Cap Screw
3mm
Nylon Nut
Plastic
Bushing
3x25mm
Cap Screw
ASSEMBLY OF THE FRONT SHOCKS
ASSEMBLY OF THE REAR SHOCKS
Assembly of the right and left hand side
are the same.
Assembly of the right and left hand side
are the same.
M3
Nylon Nut..........2
M3
Nylon Nut..........2
3 X 25mm
Cap Screw..........4
3 X 25mm
Cap Screw..........4
* Take the plastic bushing
from the shock plastic
parts tree.
ASSEMBLY OF THE TIRES AND WHEELS
INSTANT
GLUE
*Clean wheels and tires with alcohol before gluing.
A pply instant glue into the groove of the
wheel and tire. Glue both sides of wheel!.
86062
X Equal Pin
Tire
81095
Inner Foam
donut
86035
wheel, Yel
Always use tire foam
donut when building
tires.
#81091 - Med/soft
#81092 - Med.
#81093 - Multi +
#81094 - Multi -
#81095 - Hard
#15072
17mm Wheel Nuts
#15072
17mm Wheel Nuts
#86044 - Red
#86045 - White
#86046 - Lime
#86047 - Yellow
17mm 5-Star Wheels,
Two (2) Pairs per bag.
#86048 - Black
#86049 - Chrome