47 assembly of the front and rear bumper, No.8, Assembly of the booy and paintng – OFNA Racing DM-1 Spec User Manual
Page 22
47
ASSEMBLY OF THE FRONT AND REAR BUMPER
94009
4x10mm
Hex Screw
.....x2
.....x2
94026
4x12mm
Flat Head
Hex Screw
.....x2
.....x4
94020
3x12mm
Flat Head
Hex Screw
4x10mm
Hex Screw
40725
Foam Bumper
94042
4mm
Nylon Nut
NO.8
BAG
3x12mm
Flat Head
Hex Screw
Tighten
40721
4x12mm
3x12mm
Tighten
40721
4mm
ASSEMBLY OF THE BOOY AND PAINTNG.
48
Spray Paint
Paint the body with
polycarbonate spray paints.
Before cutting and making holes on the body,
put the unpainted body on the chassis
to confirm the mounting position and
location for holes and cutouts.
Mask the windows from
the inside with masking tape.
Making two holes on the front and
two holes on the rear for body posts.
9mm
9mm
Cut Out
Body Reamer
(Not included.)
31138
Body
(Option)
Use a neutral detergent to
remove any dirt and oil.
Cut out the body as shown.