OFNA Racing Jammin X1X Sport RTR - Manual (Page 39)

Option Parts For X1-CR
* Some option parts may be included in PRO version.
ONE PIECE CNC Alum.
Engine Mount
#40590 #40591 Fiber Brake Disk
#80010 Ripper Tire w/Foam Square Knob
#80020 Shredder w/Foam Round Knob
#40560 Servo Saver Connecting Plate
(Hard-Coated) #40561 7075 Alum. Front Lower Arm
Holder (Hard-Coated) #40562 7075 Alum. Rear Lower Arm
Holder 2.5 % (Hard-Coated)
#40563 Servo Saver Alum. Tube
(Hard-Coated) #40565 7075 CNC 4mm Front Shock
Stay (Hard-Coated)
#40569 Graphite Center Diff.
Mount Plate
#40570 7075 CNC Alum. Steering Knuckle
Arm-L&R (Hard-coated)
#40566 7075 CNC 4mm Rear Shock
Stay (Hard-Coated)
#40567 Graphite Radio Tray #40568 Graphite Front Plate
#40571 Universal Joint, (Rear) #40572 Universal Joint (Center/ F&R) #40573 35mm 3Pin Flywheel
#40574 Low Adjustable Engine Mount
(Hard-Coated) o #40577 CNC Rear Toe-in Plate-2.5
(Hard-Coated)
#40576 CNC Center Chassis Brace
(F&R)(Hard-Coated)
o #40578 CNC Rear Toe-in Plate-3.5
(Hard-Coated)
o #40575 CNC Rear Toe-in Plate-3
(Hard-Coated)
#40577 CNC "Z" Brace (Hard-Coated) #40582 Alum,Radio Tray Post
#40564 7075 CNC Chassis (Hard-Coated)
#40583 Alum, Wing Stay Post
Special arm shaft
#40586 CNC A- Upper Front Block
#40587 CNC A- Lower Front Block
#N/A 7075 Alum. Rear Lower Arm
Holder 1 % (Hard-Coated) #N/A 7075 Alum. Rear Lower Arm
Holder 2 % (Hard-Coated)
CHECK US OUT ON THE WEB
JAMMINPRODUCTS.COM
#40585 2.5,2.8 REAR SWAYBARS #40584 2.0,2.3 FRONT SWAYBARS
#10045 JP-2 Hard Anodized
#10046 JP-2 Polished #10054 JP-1 Hard Anodized
#10055 JP-1 Polished
#40588 CNC B- Upper Front Block
#40589 CNC B- Lower Front Block