OFNA Racing LD3 RTR - Manual (Page 22)

Front Bumper
Front Bumper
Top Plate
Front Bumper
Post Tube
94019
M3x10mm
Flat Head
Hex Screw
94004
M3x12mm
Screw
94003
M3x10mm
Screw
94003
M3x10mm
Screw
M3x12mm
Screw
Body Holder
Body Pin
39320
37410
* Insert body pins into body holder
to the desired height.
94002
M3x8mm
Screw
Body Post
(Rear)
Body Post
(Front)
Body Post
(Front)
Foam Bumper
ASSEMBLY OF THE FRONT BUMPER
38291
38291
38291
39320
38294
39320
39320
ASSEMBLY OF THE FRONT BUMPER TOP PLATE
ASSEMBLY OF THE FRONT BODY POST ASSEMBLY OF THE REAR BODY POST
G
37967
P3
O-Ring
(2 pcs)
P12 O-Ring
38331 - Gray
Adjust Nut
37650
4mm
Ball End
*Use a little shock oil to
lubricate o-Rings before
screwing on adjusting nut.
Piston
Shock Shaft
Shock Oil
M3x12
Screw
M3x12
Screw
38329
Gray
6mm Alum.
Ball & socket
(Short)
38282
6mm Alum.
Ball & socket
(Long)
37360
4mm
Ball & socket
37360
4mm
Ball & socket
*Pull down piston and pour
oil into shock cylinder. *Remove air bubbles by slowly
moving piston up and down.
Pressure Top
Ball End
( Short)
Shock Spring
Spring Holder
SHOCK Cap
2mm E-Ring
37967
C-Ring
37100
Washer
(Block)
ASSEMBLY OF THE ALUMINUM THREADED BODY SHOCKS
NOTE: LEXAN SHOCK ASSEMBLY, SEE APPENDIX PAGES
FlLLING THE SHOCKS WITH OIL
ASSEMBLY OF THE FRONT SHOCK INTO
SHOCK MOUNT ASSEMBLY OF THE FRONT SHOCK INTO
SHOCK MOUNT
ASSEMBLY THE SHOCK SPRING
Step 1 Step 2
Oil Oil Oil
Oil
37965 - Alum Threaded Shock Body.
39030 - Lexan Shock Body.
38325
37100
37966
37080
38330 - Gray
37100
38326 - Black (std)
37100
* Use the No.2 hole piston
from shock plastic tree.
* Insert the o-ring into
the groove of the adjust nut.
* Use the short ball end .
* The C-Ring must fit into
the groove.
* Use the short shock
ball end.
* Snap On.
* Snap On.
38469 - Spring Set
38470 - Blue (s)
38471 - Yellow (m)
38472 - White (h) 39320 PARTS
x x