OFNA Racing Mutilator Pro RTR 32 - Manual (Page 25)

Starter Box
(Not Included)
0
5 10 15 20 25 25 20 15 10 5
49 ASSEMBL OF THE WING Y
........X2 94041
3mm
Nylon Nut
........X2 94004
3X12mm
Hex Screw
50 MOUNTING BODY
51 STARTING OF THE ENGINE
31159
*Check the hole spacing on the underside.
1.2V
1. Turn on transmitter and then receiver.
2. Fill fuel tank with fuel bottle.
3. Connect 1.2V glow plug starter.
4. Start engine with 12V starter.
( Note the direction of the starter.)
5. After the engine be started, remove the
1.2V glow plug starter.
* Follow the engine manufacturer instruction
manuals regarding engine set-up, carburetor
and maintenance.
How to start the engine:
Starter rubber ring for car.
( Insert starter rubber
ring on the 12V starter.)
12V Starter
12V Starter and Starter
Ring
( Not Included)
1.2V
Glow Plug
Igniter
1.2V Glow Plug Igniter
(Not Included)
Glow Plug (Not Included)
There is 2 types of glow plug available
"NORMAL or Turbo" depending of the
type of the engine.
Normal Plug Turbo Plug
*To start the car, attach a glow plug igniter
to the glow plug, and use either an electric
starter or starter box applied to the flywheel
exposed through the chassis.
1.2 V
3mm
40083
3x12mm
40027
Connect with
12V battery. Note the direction of
the starter.
20