OFNA Racing Ultra LX 2e 80% - Manual (Page 20)

37 MOTOR INSTALL
36 MOTOR INSTALL
94038
3x12mm
Cap Screw
.....x2
14
94034
4x4mm
Set Screw
.....x1
38 ADJUST MOTOR AND SPUR GEAR MAINTENANCE
94040
3x8x0.8mm
Washer
.....x2
*Approx. 20mm
Step detail
4x4mm
Electric Motor
(Not Included)
30670-(12T)
30664-(13T)
30665-(14T)
30666-(15T)
30667-(16T)
30668-(17T)
3x12mm
3x8x0.8mm
Do Not
Over Tighten
Tighten the 3x12mm screw
temporary.
Ensure
Free
Movement
EXTREMELY IMPORTANT
Insert a piece of notebook paper between
spur gear and pinion gear to make correct
gear mesh.
Notebook paper
Tighten
Tighten
PUSH
Adjust the motor position to get proper gear mesh.
To get a perfect gear mesh , place a piece of notebook paper
between the gears and tighten the motor mount screws.
The spur gear will strip if the gear mesh is wrong.