Compaq Keyboard/Monitor/Mouse Switch Box - Manual (Page 10)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-1
Compaq Keyboard/Monitor/Mouse Switch Box User Guide
Writer: Kristi Wishon Project: Installation Comments:
File Name:E-ch02.doc Last Saved On:9/6/96 3:18 PM
Chapter 2
Installation
This chapter provides installation information for the Compaq
Keyboard/Monitor/Mouse Switch Box.
WARNING: To reduce the risk of personal injury or damage
to the equipment be sure that; the leveling feet are extended to
the floor and supporting the full weight of the rack. Each rack
should be level and stable. Racks that are not coupled together
require the installation of stabilizing feet. This must be
accomplished before performing any work on the rack.
WARNING: Risk of personal injury. The rack may become
unstable if more than one component is extended for any
reason. Always ensure that the rack is adequately stabilized
before extending a component outside the rack. Extend only
one component at a time.
Attaching the Slide Rail
Brackets
The figure below shows how to attach the slide rail brackets to the
Keyboard/Monitor/Mouse Switch Box. Make sure that the front end of the
rack-mount brackets angle out away from the unit.