Pigtronix Bass Station User Manual
Page 2
Effects Loop (Send / Return)
The SEND and RETURN jacks will allow you to patch any other effect(s) in between the
Compressor and Booster sections of this device. Simply connect the SEND jack to the
input of the effect you are looking to insert and connect the output of the effect to the
RETURN jack.
XLR DI output
The XLR output is wired in parallel with the main output to provide a DI signal for front
of house mixing. Like the master output, the DI signal will contain the combination of
Compressor, FX Loop and Boost sections you have activated.
Power
The Bass Station pedal can run on as little as 9VDC, but the 18VDC power supply that is
included provides a huge amount of headroom and output level resulting in the best
overall tone and dynamic range. Current draw is less than 50mA. The Bass Station pedal
does not take batteries.