Pigtronix Infinity Looper - Manual (Page 32)

4. Remote Switch Functions
We recommend that you use the Infinity Remote (www.pigtronix.
com/products/infinity-remote-switch) as your remote switch.
Plug your remote switch into the Undo jack.
4.1 Reverse
Reverse is triggered by shorting the ring to the sleeve of the Undo
jack. This is accomplished by connecting any two-button, momentary
footswitch (such as the Pigtronix Infinity Remote) to the Undo jack
with a TRS cable.
Pressing the Reverse button triggers reverse playback at the begin-
ning of the next loop cycle according to the Arm/All setting (see
page 8. Pressing Reverse while recording will instantly trigger reverse
playback once the Loop footswitch is pressed.
Pressing Reverse while playing a reversed Loop, will revert it to its
normal play direction after the next loop cycle.
Once you are in reverse playback, you can use the Undo switch to
flip flop between forwards and reverse versions of the same layer
instantly.
Hitting Reverse and then Undo before the end of the loop cycle will
cancel the requested Reverse.
31