Vernier LabQuest 2 - Manual

1
Before you use your LabQuest 2:
Remove the battery and
remove the protective sticker
covering the contacts.
Install the battery.
Connect the power adapter.
Charge for at least 12 hours.
Read the safety information
and operating instructions
found in this guide.
Get the complete user guide at
www.vernier.com/labquest/guide
table of Contents
safety Information .................................. 2–4
Warranty ...................................................... 5
Hardware overview .................................6–7
labQuest app ............................................. 8
Quick Data Collection ............................. 9
Meter screen ....................................10–11
Graph screen ....................................12–13
Data analysis ....................................14–15
table screen .....................................16–17
other screens ...................................18–19
Printing .............................................20–21
Use with Computers and tablets .........22–23
other applications ...............................24–25
Care of labQuest ..................................26–27
accessories ................................................. 28
1
2
3
4
5 2
QUICk-staRt GUIDe