Vernier Spectrum Tube Carousel Power Supply - Manual (Page 2)

System Parts
Power Supply & Storage Unit
1. Wall mount power supply
2. Power supply base and electronics
3. Carousel with eight tube stations
4. Fixed cap
5. Tube insertion aperture
6. Fiber holder (pictured below)
Tube
a. Tube
b. Hard polymer shell
c. Spring-loaded contacts
d. Gas species label
e. Safety interlock magnet
Specifications
Wall mount power supply input: 100-240 VAC, 50/60Hz; output: 15VDC,
1 A, UL listed
dimensions: 7 Ч 4.5 Ч 4 cm plus contact blades,
1.6 m cord length
weight: 100 g
Tube energizing supply: 1.8 kV AC (internal)
Power Supply & Storage Unit dimensions: 23 cm diameter × 23 cm high
weight: 1.55 kg
Fuse: T1AL 250V, 5 × 20 mm miniature time
delay/slow blow
Height of center of light-emitting
region above bench:
13.3 cm
Length of light-emitting region: 4.75 cm
Tube dimensions (in shell): 15.5 Ч 4.0 Ч 3.0 cm
weight: 88 g
Accessory
The Fiber Holder for the Spectrum Tube Carousel Power Supply securely holds an optical
fiber in the proper position to carry light from the discharge tube to the spectrometer.
Compatible with both Ocean Optics fibers and Vernier SpectroVis series fibers. The
position of the fiber can be adjusted to optimize the light intensity. The Spectrum Tube
Carousel Power Supply ships with one Fiber Holder. Additional holders can be purchased.
Order code: ST-FHC