Cybex SOLUTION X-FIX User Manual

Page 15

Advertising
background image

13

2

1

a

SECURING THE CHILD

UNINSTALLING THE SOLUTION X-FIX

perform all installation steps in reverse order.

place the child seat on the respective seat in the car.

• Release the ISOFIX connectors (w) by simultaneously pulling and slinging

back the red release buttons (y).

• pull the seat out of the installation aids (u).

• Rotate the X-fix connectors by 180°.

• Pull the X-fix lever located at the bottom of the child car seat and push the

X-fix connectors into the child seat until completely hidden.

• Please make sure that the backrest (a) of the child safety seat rests flat

against the backrest of the car seat so that the child seat is under no

circumstances in a sleeping position.

• should the headrest of the vehicle seat interfere, please pull it out

completely and turn it around or take it off entirely. The backrest (a)

optimally adjusts to almost any inclination of the vehicle seat.

• When using the isofiX-anchorages in the car, make sure that the

backrest of the Solution X-fix is perfectly aligned and in full contact

with the rear vehicle seat. The position can be adjusted with the

adjustment lever (v) located on the bottom of the child car seat.

Note! following these steps the vehicle‘s seat pad will be protected and

the Isofix connectors will be prevented from being stained or damaged.

damages and stains could obstruct a smooth operation.

Note! it is possible that some car seats that are made of soft material (e.g.

velours, leather, etc.) may show signs of usage and/or discolouration.

In order to avoid this, you could, for example, place a cover or towel

underneath it. In this context, we would also like to refer to you to our

cleaning instructions, which must absolutely be followed before the first

use of the seat.

Warning! The backrest of the Solution X-fix should rest flat against the

upright part of the car seat. Pushing the booster rearwards the seat should

be tightly pressed against the seat. For the best possible protection of your

child, the seat must be in a normal upright position!

Advertising