Belt Drives EVO-11S - Manual (Page 4)

9. Install the 4 hexagon extensions into motor plate and mount side guard with the 4 buttonhead allen bolts.
10. Clutch screw adjustment. should be
approximately 1/4 turn loose from lightly seated.
(Note: when clutch is hot the adjustment screw
adjustment is complete. (We supply a clutch
adjusting rod and nut for all models 1990-up only).
(Fig. 9)
Fig. 9 Install clutch adjusting rod supplied with kit 1986-up.
and adjust clutch.
4
should not be seated). Tighten rod nut when