Coleman 9947A726 - Manual (Page 11)

Assembly/Set up
(cont.)
■ Open Left Side Burner Lid and place
Trivet on Burner.
STEP 16 LOWER DOOR MAGNETS
STEP 18 DOORS
■ Install Left and Right Doors.
■ Insert Bottom Door Pin into hole
on Bottom Frame.
■ Hinge Pins are spring-loaded.
Pull down to insert Hinge Pin into
Top Frame Hole.
NOTE: Make sure the 2 holes on
each Door are at the top when
installed.
STEP 15 TOOL HOLDERS
Towel Bar
Tool
Hook
Lower Shelf
Lower Door
Magnets
STEP 17 UPPER DOOR MAGNETS
Top Shelf
Upper Door
Magnets
■ Install Upper Door Magnets on Top Shelf as shown.
STEP 19 DOOR HANDLES
■ Remove Screws from Handles.
■ Attach Handles to Doors as shown.
■ Tighten Screws.
STEP 14 BURNER TRIVET
11
■ Install Rotisserie Bracket to left end
of grill.
2 Required
4 Required
2 Required
■ Install Lower Door Magnets on
Lower Shelf as shown.
■ Install Tool Holders onto front of
Left Side Burner and Right Side
Table.
STEP 20 ROTISSERIE
■ Install Rotisserie Bracket as shown
to right end of grill. (Right Bracket
has larger offset.)
Bottom Frame Hole
Bottom Door Pin
Top Frame
Top Hinge Pin
4 Required