Sangean WFR-28C (V1) - Manual (Page 63)

62
GB
Setting the clock format
The clock display used in standby mode and on the playing mode screens can be set to 12 or 24
hour format. The selected format is then also used when setting the alarms.
. With your radio switched on, press the Menu button to access the menu for the current mode.
2. Rotate the Tuning Control Rotary until 'System settings' is highlighted on the display. Press the
Tuning Control Rotary to enter the system settings menu.
. Rotate the Tuning Control Rotary until 'Time/Date' is highlighted on the display. Press the
Tuning Control Rotary to enter the time setup.
4. Rotate the Tuning Control Rotary until 'Set format' is highlighted on the display. Press the
Tuning Control Rotary to enter the clock format menu. The current clock display format is
marked with an asterisk.
5. Rotate the Tuning Control Rotary to select either 2 or 24 hour format. Press the Tuning
Control Rotary to confirm your choice of clock format. The display will then revert to the
previous menu.
If the 12 hour clock format is chosen, the radio will then use the 12 hour clock for the setting of
alarms, and will display a 12 hour clock with an AM or PM indicator when in standby mode.
1
2-5
FM
Aux in
Sleep
Alarms
System settings
Main menu
>
Equaliser
Network
Time/Date
Language
System settings
>
>
>
>
Set Time/Date
Auto update
Set format
Set timezone
Daylight savings
Time/Date
>
>
12/24 hour format
Date/Time