Sangean DDR-36 (V1) - Manual (Page 28)

7
To view the alarm settings
. Press and release the Alarm button. 'Alarm  Setup' will show on the display.
. Or press and release the Alarm  button to select alarm number . 'Alarm  Setup' will show on
the display.
. Press and release the Select button to enter the settings for the chosen alarm. You may use
the Tuning controls to modify any particular setting if desired, using the Select button to enter
the modification.
When the alarm sounds
The alarm will sound at the selected times for up to 90 minutes unless cancelled. The alarm
duration used for the alarm will be as specified during the alarm setting procedure.
The alarm icon will flash on the screen and the radio will automatically switch back to standby
mode when the selected alarm time has elapsed.
To cancel an alarm, press the Standby button to return to standby mode.
Alarm 1 Setup
Alarm off