Sangean WR-22 (V1) - Manual (Page 21)

20
Setting the alarm clock
There are two alarms which can each be set to wake you to AM,
FM radio, USB buzzer alarm . The alarms may be set while the unit
is in standby mode or while playing.
. Before setting an alarm ensure the clock time is set.
Press and hold the Alarm  button to enter the alarm  setting.
2. The hour setting of alarm 1 will begin to flash. Rotate the Tuning
control rotary to select the required alarm hour, and press the
Tuning control rotary to confirm the setting. Rotate the Tuning
control rotary to select the required alarm minute, and press the
Tuning control rotary to confirm the setting.
3. Then the display will show the frequency options for the alarm.
Rotate the Tuning control rotary to select the desired option and
press the Tuning control rotary to confirm the setting.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends