Sangean ATS-909 w (V1) - Manual (Page 10)

Space in the LCD Display. Once a character is selected you may move to the next position to place
another character by using the UP/DOWN button (10).When name is completely entered press
button.
RECALLING A STATION IN MEMORY
On LW, press ATS/LW button (23),then press any of the numbered buttons on the key pad.
On MW/FM, press ATS/MW button (22) [MW] or press ATS/FM button (24),select desired page by
pressing page button(11)[PAGE] and then press any of the numbered on the key pad.
On SW, press SW button (21) [SW],select desired page by pressing page button (11)[PAGE]
and UP/DOWN button (10)until desired page is selected and then push ENTER button (17) . The
receiver will then automatically search for the strongest frequency on that page. You may change the
selected frequency using the numbered keys on the pad.
CANCELING A STATION IN MEMORY
Recall the station in memory, press the memo button (16) [M] and then press the cancel button (18) [C].
LOCKING A STATION INTO MEMORY
After programming your stations into memory you may lock any station into memrory to prevent
accidental erasure or elimination should the ATS feature be turned on again.
To lock a station recall the station you wish locked and press MEMO button (16) [M] and then lock
button (9) [ ]. The display will show memo locked symbol whenever that station is selected. To
remove station from locked position repeat above procedure and locked symbol will be removed and
station will no longer be in locked state.
EXCHANGING STATION POSITIONS IN MEMORY
To move a station in memory to another position recall station. Press MEMO button (M), MEMO and
position display will flash, press new position desired and a signal will be heard indicating the exchange
has taken place and the positions have been swapped.
SELECTING A SW BAND
To select a SW Band press METER/SW button (21) once and then press a second time. A flashing m
will appear in the display. Any of the 14 SW Bands (11-120M) can now be selected. The band selected
appears in the LCD display and will remain in the display as long as tuning activity remains within the
metered band.
Band ranges are indicated in a convenient chart above the numbered keys on the key pad.
DIRECT BUTTON (Instant Priority)
The PRIORITY button (13) [ ] allows instant recall to your favorite station from any frequency or
band by.
9
1
( )