Sangean DPR-65 Basic Black (V1) - Manual (Page 18)

7
Dynamic Range Control settings – DAB
Dynamic Range Control (also known as DRC) can make quieter
sounds easier to hear when your radio is used in a noisy environment.
. Press the Power On/Off button to switch on your radio.
. Press and hold the Info button. The display will show “Station list”.
3. Press the Tuning Up/Down buttons until the display shows “DRC
value”.
4. Press and release the Select button to enter the setting.
5. Press the Tuning Up/Down buttons to select the required DRC setting
(the default is 0).
DRC 0 – DRC is switched off, Broadcast DRC will be ignored.
DRC  – DRC is set as sent by broadcaster.
DRC / – DRC level is set to / that sent by broadcaster.
6. Press and release the Select button to confirm the setting. The display
will return to normal tuning mode.
Note:
Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio
will have no effect.