Char-Broil PORTABLE OUTDOOR FIREBOWL 10501572 - Manual (Page 3)

Carefully remove all components from the carton. Check your parts against the parts list on page 2.
First, attach the Legs to the Fire Bowl Ring by aligning the holes in each Leg with the holes in the ring bracket. Insert a
Pivot Pin through the bracket and leg, then secure the pin in place with a Hairpin Clip.
Be sure that all Legs are folded out and placed into the locked open position. To do so, pull the Locking Pin outward
while rotating the Leg into position, then let go of the Locking Pin so that it engages the hole in the Ring Bracket.
PRODUCT ASSEMBLY
Page 3
Fire Bowl
Ring
Leg
Hair Pin Clip
Leg
Hole
Pivot Pin
Ring
Bracket
2. Rotate
leg outward
1. Pull Locking Pin.
All legs shown in locked open position.