Sangean U2 (V1) - Manual (Page 5)

4
Installing Batteries
1. Unscrew the compartment fixture with a tool, lift up the
battery compartment cover located on the rear of your
Utility Radio.
2. Insert four C sizes (UM-2) battery into the compartment.
Ensure that battery is inserted in accordance with the
diagram shown.
3. Close the battery cover and screw the compartment
fixture.
4. Reduced power, distortion, stuttering sound or while
low battery LED is lighted on are all signs that the
batteries may need replacing.
5. If the radio is not to be used for any extended period of
time, it is recommended that the battery is removed
from the radio.