Sangean WFT-1D+ (V1) - Manual (Page 16)

15
Connecting to wireless network
1. Make sure you are within range of a wireless network.
2. Go to > System settings > Network > Network wizard >
[name of the wireless network].
3. If your wireless Internet access (router) haven’t been set
the password, the radio will be connected to the Internet. Or,
4. If your wireless Internet access (router) has been set the password,
the display will show either ‘Enter WEP key’ or ‘Enter WPA key’.
You therefore need to enter the correct WEP or WPA key into the
radio to allow it to communicate with your network.