Cobra Electronics Band Ultra XRS 9745 - Manual (Page 14)

Nothing Comes Close to a Cobra ® 23
Settings
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Your Detector
22 English
Settings
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Your Detector
SmartPower
Your detector includes the SmartPower feature that, when activated, will put the
unit into Standby mode (low power) for about 30 minutes after the car’s engine
has been turned Off. After 30 minutes in Standby mode, the unit will automatically
turn Off.
Before SmartPower enters Standby mode, you will hear
one beep and Pwr Save will appear on the display. To
return the unit to normal Power mode or exit Standby
mode, start the car, press any button or turn the unit Off
and then On again. The factory setting is SmartPower On. SmartPower Entering
Standby Mode
Pwr Save
SmartPower On
...Power On
SmartPower Off
...Power Off
To Turn SmartPower Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to SmartPower. Tone Visual Display Voice
Two beeps SmartPower On SmartPower On
One beep SmartPower Off SmartPower Off
Spectre Detect On
Spectre On
Spectre Detect Off
S p e c t r e O f f
Spectre Audio On
...Audio On
Spectre Audio Off
...Audio Off
To Turn Spectre Detect Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Spectre Detect. Tone Visual Display Voice
Two beeps Spectre On Spectre On
One beep Spectre Off Spectre Off
To Turn Spectre Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Spectre Audio. Tone Visual Display Voice
Two beeps Spectre Audio On Spectre Audio On
One beep Spectre Audio Off Spectre Audio Off
Spectre I & IV+ Alerts
Police use radar detector detectors (RDDs) to spot users of radar detectors.
Your detector is able to identify signals from Spectre I and Spectre IV+ RDDs
and can provide alerts when any of these or similar devices are in use near
your vehicle.
Your detector can be spotted by Spectre IV+ RDDs, but is invisible to
Spectre I RDDs. You can choose whether or not you want your unit to show
Spectre Alerts. With Spectre Detect mode On, you can also choose whether or
not you want your unit to sound audible Spectre Alerts. The factory settings are
Spectre Detect Off, Spectre Audio Off.