Storix Software SBAdmin Commands Reference - Manual (Page 29)

Storix System Backup Administrator - 29 - Version 8.2 Commands Reference
back-tick (`). Using a text string, such as “My-Encryption-Key!” will help you to remember the
key in case it is lost or changed, but will limit the range of hexadecimal characters that are
generated.
Note that the encryption key (or text string) that is entered must be the following number of
characters, based on the encryption bits setting:
Bits Hex String
(length)
ASCII text
string (length)
128 32 16
192 48 24
256 64 32