CANOGA PERKINS 2345 T3 Fiber Optic Modem - Manual (Page 20)

EdgeAccess Universal Chassis System
Model 2345 User Manual 3-4
Login and Main Menu
When you connect directly to the 2345 or to the DMM through HyperTerminal or Telnet, the first
screen is the Login Menu. To log in, follow these steps:
1. If this is your initial setup and no username or password has been set, type admin and press
<Enter> at the prompts for the username and password. Otherwise, type your username and press
<Enter>, then type your password and press <Enter>.
2. If you are using a DMM, the Main Menu for the DMM appears after you log in. This is the main
management screen for the DMM. For details on all menu options, see the user manual for your
DMM. From this screen, access the 2345 by either of two methods.
• To reach the 2345 directly, follow these steps:
a. Type 4, "Manage or access a specific Module," and press <Enter>.
b. Type the slot and chassis numbers with a slash, such as " 1/4 " for chassis 1, slot 4, and then
press <Enter>.
c. At the Module Menu, type 4 , "Access User Interface," then press <Enter> to reach the Main
Menu for the 2345.
• To reach the chassis, and then select the 2345, follow these steps:
a. Type 3 , "Manage or access a specific Chassis," and press <Enter>, press <Space> to cycle
between the chassis in the domain, and then press <Enter> to select the chassis.
b. At the Chassis Management screen, press <Space> to cycle to the slot number for the 2345,
then press <Enter> to reach the Main Menu for the 2345.
You can reach all configuration options from the Main Menu; see Table 4.
Table 4. Main Menu Selections
Menu Item Description
1. System Configuration View and set values for the system information and
communications parameters
2. Diagnostics Set up loopback for local and remote devices
3. Performance Monitoring View statistics related to RFC 2496 or G.826 standards
4. Link Error Counters View number of errors that occur on the link
5. System Alarms View current conditions for local and remote alarms
6. Utilities Set up managing hosts for accessing the DMM and
receiving traps
7. Software Update Download and install new firmware