CANOGA PERKINS 1500 Domain Management Module - Manual (Page 27)

Model 1500 Domain Management Module 3-15
Use the Radius Client Configuration screen to set up communication with the Radius server in
order to authenticate users at login. To access the Radius Client Configuration screen, follow
these steps:
1. From the Change Security & Passwords menu, type 3 , "Radius Client Configuration," and
press <Enter>. The Radius Client Configuration appears.
2. At the prompt, type 1 to set the authentication mode, or 2 or 3 to set up communication with
a primary or alternate Radius server, then follow the prompts on the screen.
• Radius Client Mode: Radius then Local, Local then Radius, or None; Selects the primary
authentication source and the secondary source if the primary does not respond or rejects the
user; "Radius" means the radius server, "Local" means the DMM account database, "None"
indicates only the DMM account database
• Radius Server: Enter values for these parameters for a primary or alternate Radius server:
• IP Address: Set the address for the server; 0.0.0.0 indicates no server
• Shared Secret: Must match the Shared Secret set on the Radius server
• Retries: How many times the DMM tries to authenticate the user before trying the
alternate server or giving up; Range is 0 to 10
• Timeout: How long, in seconds, between unsuccessful attempts; Range is 1 to 30
• Priority: Set which server to contact first; Range is 1 (highest priority) to 255 lowest
priority); if priority is the same for two servers, the DMM will alternate tries between the
servers
3. To return to the Change Security & Passwords menu, press <Esc>.
Change Your Password
Whether you have supervisor, operator, or observer access, you can update your password for the
domain in order to maintain system security. You cannot change the password for any other
users. To access the Change Password screen, follow these steps:
1. From the Main Menu, type 10 , "Change Password," and press <Enter>.
2. To change your password, follow the prompts on the screen.
3. To return to the Main Menu, press <Esc>.
Set Up the Notification Destination for Traps
Use the Trap Notification/Destination Table to view and set up the destination for Trap messages.
In addition to setting the host address and port, you can set the security level for the notification,
then set values for various parameters, depending on the security level. For details on and values
for security parameters for your system, see the documentation for your network security system.
To access and update the Trap Notification/Destination Table, follow these steps:
1. At the Domain Management Module menu, type 7 , Trap Destination Table, and press
<Enter>. The Trap Notification/Destination Table screen appears.