Set up vlans, Set up vlans -19 – CANOGA PERKINS 9160 10 Gigabit Ethernet Network Interface Device User Manual
Page 33
Set Up VLANs
Use the VLAN Configuration screen to view and set VLAN parameters for the 9160. To access the
VLAN Configuration screen, follow these steps:
1. From the Switch Configuration menu, type 5, "VLAN Configuration," and press <Enter>.
2. At the VLAN Configuration screen, type
1
to view or edit VLAN information and press <Enter>,
then follow the prompts on the screen. You can view a specific port or LAG, or set the VLAN
Name, up to 20 characters.
3. At the VLAN Configuration screen, to view a part of the VLAN list that does not appear on the
screen, type
2
, then enter the number of the VLAN where you want to start viewing the list.
4. To set up ID translation for a specific port, type
3
, then press <Space> to select that port; and
follow the prompts on the port x VLAN ID Translation screen.
5. To set up Priority translation for a specific port, type
4
, then press <Space> to select that port;
and follow the prompts on the port x VLAN Priority Translation screen.
6. To add or remove a VLAN, type
5
or
6
and press <Enter>, then type or select the VLAN number.
7. To set up VLAN information for a specific port, type
7
, then press <Space> to select that port;
and set values for these parameters on the port x Information screen:
• Participation Include/Exclude/Auto: Select specific numbers of VLANs that this port will
Include (always), Exclude (never), or Auto (dynamically) participate in
• Tagging Enable/Disable: Enable, allow tags to remain on packets as they exit the 9160; or
Disable, strip tags from packets before they exit the 9160
• Double Tagging Enable/Disable: Enable, add service provider ID tags to packets as they exit
the 9160; or Disable, strip service provider ID tags from packets before they exit the 9160
• Accept Frame: Accept frames for this VLAN Only or Accept All frames
• Ingress Filter: Enable, filter out received frames that are not for this VLAN, or Disable,
forward all received frames.
• PVID: Enter the VLAN ID to be assigned to any received untagged or priority tagged frames
• Default User Priority: Set the priority for any tagged packets received at this port
8. To view or update parameters for a specific VLAN, type
2
, "View/Change Interface," and press
<Enter>. You can edit various parameters, such as Admin Mode, Priority, Path Cost, and Edge
Port.
9. To return to the Switch Configuration menu, press <Esc>.
9160 10 Gigabit Ethernet Network Interface Device
3-19