Citronic CSL-SERIES User Manual
Page 8
CSP & CSL-series User Manual
Master Output Section
20. 2 TRACK INPUT Left + Right RCA connection for auxiliary input of a
playback device (e.g. CD or mp3) governed by the
2TK IN LEVEL rotary control
21. 2 TRACK OUT
Left + Right RCA connection for main mix output to a
recording device. This output is pre-master-fader
(i.e. unaffected by main Left + Right faders)
22. MAIN L OUTPUT Balanced XLR output for main Left out
23. MAIN R OUTPUT Balanced XLR output for main Right out
24. AUX SEND
Unbalanced jack output from AUX SEND routes.
The mix is governed by AUX levels from each channel.
25. FX / AUX SEND Unbalanced jack output from FX SEND routes.
Overrides internal DSP effects when a jack is connected.
The mix is governed by FX levels from each channel.
26. FX MUTE
Footswitch jack to mute FX.
Connect a non-latching footswitch here to mute or un-mute the FX SEND signal.
27. PHONES
Stereo headphones 6.3mm jack output
Master Routing Section
28. EFFECTS fader
Controls the level of FX to main mix
29. Status LEDs
Indicate Power On, PFL activated &
Amplifier Protect (CSP only) statuses
30. FX SEND
Overall level control of signals routed to
the FX Send buss, either for internal
DSP or FX Send output (20). When
using the internal DSP, it is important to
observe the LED level meter (16) on the
DSP section and if the signal is clipping,
reduce the FX SEND level accordingly.
31. AUX SEND
Overall level control of signals routed to
the AUX Send output (19)
32. 2-TK LEVEL
Level control for the 2-track RCA inputs
33. PHONES LEVEL Level control for headphones output.
Pressing this button reverses this by routing the output of
the PC or Mac back to the PC interface for playback.
34. VU meters
Dual 10-segment LED ladders indication output level (or channel level if PFL is active)
35. Master faders
Controls for main Left & Right output levels