Dillon FI-127 - Manual (Page 17)

17
32. Press the ESCAPE key to return
to the LOAdCELL display, then
press MENU to move to the last
user menu item. . . boundS is displayed. Use this item to
set target, over and under values. See
example at left.
33. Press the ENTER key. . . OVEr is displayed.
34. Press ENTER to see the current
value. Key in a positive value then
press ENTER to accept it. . . OVEr is displayed.
35. Press MENU to display UndEr.
Press ENTER to see the current
value. Key in a negative value then
press ENTER to accept it. . . UndEr is displayed.
36. Press MENU to display tArGEt.
Press ENTER to see the current
value. Key in a value then press
ENTER to accept it. . . tArGEt is displayed.
37. This is the last item in the user
menu. Press ESCAPE repeatedly
or SELECT to return to
Display mode.
Target, Over, Under Example
Target value = 350
Under value = -10
Over value = 20
With these settings the ACCEPT
annunciator will be lit when force is
340 to 370. The UNDER annuncia-
tor will be lit when force is less than
340. The OVER annunciator will be
lit when force is greater than 370.
Bounds