DVR systems IPC - Manual (Page 36)

Network Camera User’s Manual 35
Multicast function. For detailed information about Multicast, refer to Section
6.3.1 TCP/IP Settings.
●Live View Performance: Set the live view performance to Least Delay,
Balanced or Best Fluency.
●Record File Settings: Set the saving path of the recorded video files. Valid for the
record files you recorded with the web browser.
●Record File Size: Select the packed size of the manually recorded and
downloaded video files to 256M, 512M or 1G. After the selection, the
maximum record file size is the value you selected.
●Save record files to: Set the saving path for the manually recorded video files.
●Save downloaded files to: Set the saving path for the downloaded video files in
playback mode.
●Picture and Clip Settings: Set the saving paths of the captured pictures and
clipped video files. Valid for the pictures you captured with the web browser.
●Save snapshots in live view to: Set the saving path of the manually captured
pictures in live view mode.
●Save snapshots when playback to: Set the saving path of the captured pictures
in playback mode.
●Save clips to: Set the saving path of the clipped video files in playback mode.
Note: You can click to change the directory for saving the clips and pictures.
3. Click to save the settings.
6.2 Configuring Time Settings
Purpose:
You can follow the instructions in this section to configure the time synchronization
and DST settings.
Steps:
1. Enter the Time Settings interface:
Configuration > Basic Configuration > System > Time Settings
Or Configuration > Advanced Configuration > System > Time Settings