Dynon Avionics DX15 - Manual (Page 17)

DX15 User Guide 2‐5
Assembling Your DX15
 Screw the supplied antenna onto the antenna connector, clockwise,
using light finger pressure (do not tighten excessively).
 Attach the supplied battery pack by mating the two tabs on the
bottom of the battery with the associated slots at the bottom of the
battery holder on the radio.
 Gently, click the upper part of the battery into place.
 The two spring‐loaded latches on the sides of the battery should now
be in the up position.
 Attach the belt clip to the battery pack.
 Insert the supplied lanyard into the lanyard tab on the DX15.
Your DX15 is now ready for use. Note that the Li‐Ion battery is shipped
only partially charged. Dynon recommends that you fully charge your
DX15 as described in the Charging the Battery section below.