Lec R5510W/S/B - Manual (Page 14)

6
2.
Remove the screws and bracket from the opposite
side and fit back to where the hinge bracket was
4.
Remove screws and hinge bracket and refit on
opposite side.
Check that door is
aligned horizontally and
vertically and that the
seals are closed on all
sides before finally
tightening the bottom
hinge
Re-adjust the levelling
feet
Reversing The Door
11
Reversing the door
FOR: The doors on the R551 OW/S/B
Undo the screws and remove the hinge bracket
from the base A spanner may be required to
loosen the bolts first
Slide the door down and off the top hinge pin and
lift away from the appliance.
Slide the Appliance door back on to the top hinge
making sure its the right way. up
Screw the bottom hinge into place on the new
side.
Changing the bulb
• Pull the lamp forwards to gain access to the lamp
holder. Unscrew the light bulb in an anti clockwise
direction by the holder. Replace the bulb with one of
the correct size and type.
Replace the lamp cover by pushing the cover back-
wards along the grooves. Reconnect the appliance to
the electricity supply.