Leica Geosystems Basic Laser Plummet - Manual (Page 11)

© Leica Geosystems 11 Basic Laser Plummet-1.1.0en
4. By adjusting the length of
the tripod legs level-up the
circular level.
5. By turning the footscrews
level-up the circular level. Now
the tribrach is leveled up exactly.
6. Shift the tribrach on the trivet
until the laser spot coincides
again with the ground point.
7. Check levelling and repeat
steps 5 and 6 of this procedure
until the required positioning
accuracy is reached.
Always lock basic laser plummet SNLL111 in the
tribrach!
4
4
4
10-BLL
4