Leica Geosystems PlusXL - Manual (Page 14)

Leica DISTO
TM
PlusXL
PlusXL_Manual_1.0.7_en 14/15 28.01.2004
These files are accessible in Excel through the menu "Files | Open“ under "Desktop | PlusXL Data“
(screenshot 13):
Screenshot 13
Transferring measured values from the Leica DISTO
TM plus to Excel follows the same procedure as with the
pocket PC (refer to section 9 „Transferring measured data to Excel“).
The PlusXL button is located in the taskbar below
Screenshot 14
Click on it to display the last measured value.
Screenshot 15
This arrow button (located on the lower left in screenshot 15) is used to s elect whether after transferring data
to an EXCEL cell, the curser then jumps one cell to the right or downwards. The arrow shows the current
selection. "Right" is the default setting.
The info button displays information about the program version and about the software producer, TBM-
Solutions Becker.