Leica Geosystems Leica GeoAce - Manual (Page 27)

GeoAce, Leica GeoAce RTK Base Station User Interface 27
Snap Previous Snaps a previously used position and reports it again. This is done for in-field repeat-
ability with ease of setup.

The Instrument must be re-positioned at the exact same position to deter-
mine that this particular location has been used before.

Averaged position information are automatically used for faster re-localisa-
tion when switching from Averaged to Snap Previous mode.

When changing from Fixed Position to Snap Previous mode, it takes
approximately 1 minute to snap a position or create a new one.
Averaged The instrument will average its position for a preset amount of time. This averaging
results in a new position. It is done every time the base station starts up.
• 1 minute (default setting)
• 5 minutes
• 15 minutes
• 30 minutes
• 1 hour
• 6 hours
• 12 hours
• 24 hours

Long time averaging can be used e.g. for position data acquisition for Fixed
Position mode.